+7(495) 966-06-16
RusENG

Equipment

Equipment Technological arrangement Consumables
                 

Hydraulic Unit AG-1

The multi-purpose drive unit toprovide the operation of the cutting-offand grinding machines during the aluminothermic rail welding process.

Read more...

Hydraulic Unit AG-2

The multi-purpose drive unit toprovide the operation of the cutting-offand grinding machines during the aluminothermic rail welding process.

Hydraulic Cutting Machine SOG-1

The hydraulic device to remove the exterior part in the joint area after the aluminothermic welding of the rail is completed. The drivemechanism of the cutting machine is the Hydraulic Unit AG-1/AG-2.

Hydraulic Grinding Machine SShG-1

It presents the device to grind the welding joints after the exterior part of the metal is removed by the cutting machine during the aluminothermic rail welding in the joint area.The drive mechanism of the grinding machine isthe Hydraulic Unit AG-1/AG-2.

       
       

Electrical Grinding Machine SShE-1

The device to grind the welding joints after the exterior part of the metal is removed by the cutting machine during the aluminothermic rail welding in the joint area.

Rail-Cutting Machine SR-1

is designed to provide transverse cutting of rails during the preparation to thewelding. For the accuracy and compliance with the geometric parameters (e.g., with the manufacturing clearance of the rails to be welded), the machine is equipped with the guide frame fastened at the railhead. The frame is customized per kit..

Metal Cutting Knife NO-1

Installed into the cutting machine, it serves tocut off the exterior part of the metalduring the intermediate casting after the process of the aluminothermic rail welding iscompleted.

Hydraulic Dynamic Nut Runner GDG-1500

is designed for fast screwing and unscrewing of the bolted joints during the mounting/dismounting works.